PyUAVCAN is a full-featured implementation of the UAVCAN protocol stack intended for non-embedded, user-facing applications such as GUI software, diagnostic tools, automation scripts, prototypes, and various R&D cases. It is designed to support GNU/Linux, MS Windows, and macOS as first-class target platforms.
The reader should understand the basics of UAVCAN and be familiar with asynchronous programming in Python to read this documentation.
The library consists of several loosely coupled submodules, each implementing a well-segregated part of the protocol:
pyuavcan.transport— the abstract UAVCAN transport layer model and several concrete transport implementations (UAVCAN/CAN, UAVCAN/UDP, UAVCAN/serial, etc.). This submodule exposes a relatively low-level API where data is represented as serialized blocks of bytes. Users may build custom concrete transports based on this module as well. Typical applications are not expected to use this API directly.
pyuavcan.presentation— this layer binds the transport layer together with DSDL serialization logic, providing a higher-level object-oriented API. At this layer, data is represented as instances of auto-generated Python classes (code generation is managed by
pyuavcan.dsdl). Typical applications are not expected to use this API directly.
pyuavcan.util— a loosely organized collection of various utility functions and classes that are used across the library. User applications may benefit from them also.
The overall structure of the library and its mapping onto the UAVCAN protocol is shown on the following diagram:
The dependency relations of the submodules are as follows:
Every submodule is imported automatically except the application layer and concrete transport implementation submodules — those must be imported explicitly by the user:
>>> import pyuavcan >>> pyuavcan.dsdl.serialize # OK, the DSDL submodule is auto-imported. <function serialize at ...> >>> pyuavcan.transport.can # Not the transport-specific modules though. Traceback (most recent call last): ... AttributeError: module 'pyuavcan.transport' has no attribute 'can' >>> import pyuavcan.transport.can # Import the necessary transports explicitly before use. >>> import pyuavcan.transport.serial >>> import pyuavcan.application # Likewise the application layer -- it depends on DSDL generated classes.
The UAVCAN protocol itself is designed to support different transports such as CAN bus (UAVCAN/CAN), UDP/IP (UAVCAN/UDP), raw serial links (UAVCAN/serial), and so on. Generally, a real-time safety-critical implementation of UAVCAN would support a limited subset of transports defined by the protocol (often just one) in order to reduce the validation & verification efforts. PyUAVCAN is different — it is created for user-facing software rather than reliable deeply embedded systems; that is, PyUAVCAN can’t be put onboard a vehicle, but it can be put onto the computer of an engineer or a researcher building said vehicle to help them implement, understand, validate, verify, and diagnose its onboard network. Hence, PyUAVCAN trades off simplicity and constrainedness (desirable for embedded systems) for extensibility and repurposeability (desirable for user-facing software).
The library consists of a transport-agnostic core which implements the higher levels of the UAVCAN protocol,
DSDL code generation, and object serialization.
The core defines an abstract transport model which decouples it from transport-specific logic.
The main component of the abstract transport model is the interface class
accompanied by several auxiliary definitions available in the same module
The concrete transports implemented in the library are contained in nested submodules; here is the full list of them:
The standard UAVCAN/CAN transport implementation as defined in the UAVCAN specification.
This is a composite over a set of
The loopback transport is intended for basic testing and API usage demonstrations.
The UAVCAN/UDP (IP v4/v6) transport is designed for low-latency, high-throughput, high-reliability vehicular networks based on Ethernet.
The UAVCAN/Serial transport is designed for OSI L1 byte-level serial links and tunnels, such as UART, RS-422/485/232 (duplex), USB CDC ACM, TCP/IP, etc.
Typical applications are not expected to initialize their transport manually, or to access this module at all.
Initialization of low-level components is fully managed by
Users can implement their own custom transports by subclassing
Whenever the API documentation refers to monotonic time, the time system of
asyncio.AbstractEventLoop.time() is implied.
Per asyncio, it defaults to
time.monotonic(); it is not recommended to change this.
This principle is valid for all other components of the library.
Typically, a given concrete transport implementation would need to support multiple different lower-level communication mediums for the sake of application flexibility. Such lower-level implementation details fall outside of the scope of the UAVCAN transport model entirely, but they are relevant for this library as we want to encourage consistent design across the codebase. Such lower-level modules are called media sub-layers.
Media sub-layer implementations should be located under the submodule called
which in turn should be located under its parent transport’s submodule, i.e.,
The media interface class should be
derived concrete implementations should be suffixed with
Users may implement their custom media drivers for use with the transport by subclassing
Media as well.
Take the CAN media sub-layer for example; it contains the following classes (among others):
Media sub-layer modules should not be auto-imported. Instead, the user should import the required media sub-modules manually as necessary. This is important because sub-layers may have specific dependency requirements which are not guaranteed to be satisfied in all deployments; also, unnecessary submodules slow down package initialization and increase the memory footprint of the application, not to mention possible software reliability issues.
Some transport implementations may be entirely monolithic, without a dedicated media sub-layer.
For example, see
pyuavcan.transport.redundant.RedundantTransport is used to operate with
UAVCAN networks built with redundant transports.
In order to initialize it, the application should first initialize each of the physical transports and then
supply them to the redundant pseudo-transport instance.
Afterwards, the configured instance is used with the upper layers of the protocol stack, as shown on the diagram.
The UAVCAN Specification adds the following remark on redundant transports:
Reassembly of transfers from redundant interfaces may be implemented either on the per-transport-frame level or on the per-transfer level. The former amounts to receiving individual transport frames from redundant interfaces which are then used for reassembly; it can be seen that this method requires that all transports in the redundant group use identical application-level MTU (i.e., same number of transfer pay-load bytes per frame). The latter can be implemented by treating each transport in the redundant group separately, so that each runs an independent transfer reassembly process, whose outputs are then deduplicated on the per-transfer level; this method may be more computationally complex but it provides greater flexibility.
Per this classification, PyUAVCAN implements per-transfer redundancy.
Advanced network diagnostics: sniffing/snooping, tracing, spoofing
Packet capture (aka sniffing or snooping) and their further analysis (either real-time or postmortem) are vital for advanced network diagnostics or debugging. While existing general-purpose solutions like Wireshark, libpcap, npcap, SocketCAN, etc. are adequate for low-level access, they are unsuitable for non-trivial use cases where comprehensive analysis is desired.
Certain scenarios require emission of spoofed traffic where some of its parameters are intentionally distorted (like fake source address). This may be useful for implementing complex end-to-end tests for UAVCAN-enabled equipment, running HITL/SITL simulation, or validating devices for compliance against the UAVCAN Specification.
These capabilities are covered by the advanced network diagnostics API exposed by the transport layer:
pyuavcan.transport.Transport.begin_capture()— capturing on a transport refers to monitoring low-level network events and packets exchanged over the network even if they neither originate nor terminate at the local node.
pyuavcan.transport.Transport.make_tracer()— tracing refers to reconstructing high-level processes that transpire on the network from a sequence of captured low-level events. Tracing may take place in real-time (with PyUAVCAN connected to a live network) or offline (with events read from a black box recorder or from a log file).
pyuavcan.transport.Transport.spoof()— spoofing refers to faking network transactions as if they were coming from a different node (possibly a non-existent one) or whose parameters are significantly altered (e.g., out-of-sequence transfer-ID).
These advanced capabilities exist alongside the main communication logic using a separate set of API entities because their semantics are incompatible with regular applications.
Some transports support virtual interfaces that can be used for testing and experimentation instead of physical connections. For example, the UAVCAN/CAN transport supports virtual CAN buses via SocketCAN, and the serial transport supports TCP/IP tunneling and local loopback mode.
The DSDL support module
pyuavcan.dsdl is used for automatic generation of Python
classes from DSDL type definitions.
The auto-generated classes have a high-level application-facing API and built-in auto-generated
serialization and deserialization routines.
By default, DSDL-generated packages are stored in the current working directory.
This is convenient because the packages contained in the same directory are importable by default.
If a different directory is used, it has to be added to the import lookup path manually
either via the
PYTHONPATH environment variable or via
The main API entries are:
pyuavcan.dsdl.compile()— transcompiles a DSDL namespace into a Python package.
pyuavcan.dsdl.update_from_builtin()— used to convert a DSDL object instance to/from a simplified representation using only built-in types such as
str, and so on. These can be used as an intermediate representation for conversion to/from JSON, YAML, and other commonly used serialization formats.
The role of the presentation layer submodule
pyuavcan.presentation is to provide a
high-level object-oriented interface and to route data between port instances
(publishers, subscribers, RPC-clients, and RPC-servers) and their transport sessions.
A typical application is not expected to access the presentation-layer API directly;
instead, it should rely on the higher-level API entities provided by
pyuavcan.application provides the top-level API for the application and implements certain
standard application-layer functions defined by the UAVCAN Specification (chapter 5 Application layer).
The main entry point of the library is
This submodule requires the standard DSDL namespace
uavcan to be compiled first (see
so it is not auto-imported.
A typical usage scenario is to either distribute compiled DSDL namespaces together with the application,
or to generate them lazily before importing this submodule.
Chapter Demo contains a complete usage example.
There are several submodules under this one that implement various application-layer functions of the protocol. Here is the full list them:
This module implements forwarding between the standard subject
Keeps track of online nodes by subscribing to
Plug-and-play node-ID allocation logic.
Implementation of the UAVCAN register interface as defined in the UAVCAN Specification (section 5.3 Application-layer functions).
Excepting some basic functions that are always initialized by default (like heartbeat or the register interface), these modules are not auto-imported.
pyuavcan.util contains a loosely organized collection of minor utilities and helpers that are
used by the library and are also available for reuse by the application.